Eating Out
-
BentgoBentgo Microsteel Stainless Steel Bento Box 1.2L Rose GoldMicrowave safe stainless steel (lid off) with removable divider to turn this in to a bento box with 2 compartments. Leakproof with silicone seal and valve.View product details$116.95 -
BentgoBentgo Microsteel Stainless Steel Bento Box 1.2L AquaMicrowave safe stainless steel (lid off) with removable divider to turn this in to a bento box with 2 compartments. Leakproof with silicone seal and valve.View product detailsSpecial Price $65.95 Regular Price $116.95Save 44% -
BentgoBentgo Microsteel Stainless Steel Bento Box 1.2L Carbon BlackMicrowave safe stainless steel (lid off) with removable divider to turn this in to a bento box with 2 compartments. Leakproof with silicone seal and valve.View product detailsSpecial Price $65.95 Regular Price $116.95Save 44%
Bentgo product at a glance
Only compare specifications that are stated for the Bentgo products currently listed. As the present category selection centres on one container, the table below provides a product-at-a-glance summary rather than suggesting differences between models that are not available.
| Feature | Current product information |
|---|---|
| Product format | Stainless steel bento-style food container with a removable divider. |
| Capacity | Just under one litre, also listed as four cups. |
| Compartments | One main space without the divider or two compartments when the divider is fitted. The divider can be positioned in different places. |
| Base material | MicroSteel stainless steel. |
| Seal | Silicone seal. Current product information describes the properly closed container as leakproof for runny foods. |
| Microwave use | The base is identified as microwave safe. The lid is not microwave safe and must be removed before heating. Follow the supplied instructions. |
| External dimensions | Not stated in the supplied category information; check the product listing. |
| Product weight | Not stated in the supplied category information. |
| Dishwasher suitability | Not stated in the supplied category information; follow the model-specific care directions. |
| Oven and freezer suitability | Not stated. Do not assume suitability without manufacturer approval. |
Use capacity and compartment flexibility to assess meal fit, then check the individual product page for complete dimensions, weight, cleaning directions and current appliance instructions. Specifications can apply differently to the base, lid, divider and seal, so each component should be checked separately.
Bentgo lunch box FAQs
What is Bentgo, and is it the same as bento?
Bentgo is an American brand of compartmentalised lunch boxes and food containers. Bento describes the meal format or style of container, while Bentgo is a brand name. A Bentgo bento box is therefore a Bentgo product designed around a divided or compartmentalised format.
Where can I buy Bentgo in Australia?
You can browse the Bentgo products currently available from Shop Naturally on this Australian category page. Open the individual product listing to confirm current availability, specifications and purchasing options for your location.
Is a Bentgo lunch box suitable for adults?
Suitability depends on your meal size and preferred layout rather than an age label. Compare the verified capacity, external dimensions and compartment configuration with the amount and type of food you normally pack. The currently listed container holds just under one litre and has a removable divider.
Can Bentgo containers go in the microwave?
Microwave suitability varies by model and component. For the MicroSteel container currently listed, the stainless steel base is identified as microwave safe, but the lid is not. Remove all non-approved components and follow the supplied heating instructions. The container may be hot to the touch after reheating.
Where are Bentgo products made?
Bentgo is described as an American brand, but that does not establish the manufacturing country of a particular product. Manufacturing origin is not stated in the supplied category information. Check the current product packaging or manufacturer documentation for model-specific origin details.
Practical tips for using your Bentgo container
Before first use, read the instructions supplied with your Bentgo lunch box and identify which directions apply to the base, lid, divider and seal. Materials and appliance suitability can vary between components, so treating the container as a single unit may lead to incorrect heating or cleaning.
Pack for the compartment layout
Choose foods that suit the available spaces and avoid overfilling around the rim, divider or seal. With a repositionable divider, adjust the sections before adding food and make sure the divider is seated as directed. This is more useful than selecting a layout solely for its appearance.
Check seals and closures before transport
Inspect the silicone seal for food residue, twisting or incomplete seating. Wipe the rim clean and close the lid evenly according to the product instructions. Before placing the container in a bag, hold it level and check that every closure is properly engaged. These checks support correct use without guaranteeing performance in every transport situation.
Heat only approved components
For the currently listed MicroSteel container, remove the lid before putting the microwave-safe base in the microwave. Follow any manufacturer directions covering microwave power, heating time and positioning. Do not place the lid, seal or other removable parts in an appliance unless their instructions specifically permit it.
Use care when removing the base after heating because metal containing hot food can become hot to the touch. Do not assume that microwave suitability also means oven, freezer or dishwasher suitability.
Clean and inspect removable parts
Remove detachable components when the care instructions direct you to do so, allowing food residue to be cleared from edges and seal channels. Let all parts dry before reassembly and storage. Periodically inspect the divider, seal, lid and closures for changes that could prevent correct fitting, and refer to the product documentation if a component no longer sits as intended.




