- Vacuum Insulated Stainless Steel
- Hot insulation for up to 6 hours
- New Mag Lid with magnetic top to hold the lid in place while drinking
- Cold insulation for up to 24 hours, even longer with ice
The Camelbak Chute bottle has had an upgrade and is now available in a vacuum stainless steel insulated version. It's suitable for both hot and cold drinks, so it can double as an insulated flask or travel mug as well as a hydration bottle for cold drinks. It has the same ergonomic high-flow spout as the original Tritan version of the bottle which is angled and contoured for efficient, full-on hydration.
The leak-proof, tethered cap twists off with just half a turn and conveniently snaps into the lid with a magnet so it's out of the way when you're drinking. The cap is attached to the lid removing the risk of dropping it and never finding it again.
The threads for the cap are on the inside of the spout so you get a comfortable lip seal. And the one-piece tether is twice as clever as any you'll see on the market. It keeps the top locked out of your way for one-handed refills on the go. As outlined in the additional photos shown, the lid has two openings, one smaller opening to drink from and a larger one to fill and clean your bottle.
"CamelBak's Got Your Bak,' Guarantee: If we built it, we'll Bak it, with our lifetime guarantee."
The insulated Chute bottles are made from 2 layers of vacuum insulated stainless steel and are covered by a lifetime guarantee against manufacturing defects. When you purchase from us, an official Australian Stockist, you guarantee yourself a trouble free lifetime with your bottle.
Insulation periods advertised are a guide only and can be affected by original temperature, how full the bottle is, and how often you open the lid. For hot insulation, filled, unopened and preheated with hot water, your Chute bottle should still be holding a minimum of 50% of it's original heat at the end of the insulation period. Extend the life of your cold insulation with ice cubes.
|Volume||40oz / 1.2 litres|
|Main Material||Stainless Steel|
|Lid||Screw cap with pour spout|
|Colour||Silver with red powder coated paint|
|Leak / Spillproof||Leakproof|
|Insulation||Up to 6 hours hot|
Up to 24 hours cold
|Care Instructions||Handwash to keep the powder-coated paint on the exterior of the bottle in tact.|